Fein SCW 16-6 Manual De Instrucciones página 9

SCW 16-6 - Buch Seite 9 Montag, 18. März 2002 10:23 10
SCW 16-6
Operating instructions for angle-headed
driver.
Overview.
1 Tool holder
Mount the tool.
2 Selector switch for clockwise and
anti-clockwise rotation
Select when power tool is at a
standstill.
3 Switch
For switching ON/OFF.
4 Lubricating nipple
For lubricating drive shaft.
5 Auxiliary handle
For mounting on the left or right of the
power tool.
6 Supplied accessories
Hexagon socket tools
SW 13, 17, 19 (a).
Intermediate piece 1/4" (b).
Intermediate piece 5/16" (c).
Bit 1/4" PZ 4 (d).
Bit 5/16" TX 40 (e).
Auxiliary handle (f).
Carry case (g).
For your safety.
Before using this power tool, read
and comply with:
these operating instructions,
the enclosed safety instructions
(document number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
These operating instructions and the
enclosed safety information should be
kept carefully for later use and enclosed
with the machine, should it be passed on
or sold.
Intended use.
This power tool is intended for:
commercial use in industry and trade,
for driving screws into/out of soft material
such as wood.
The power tool is not suitable for screw-
driving jobs on hard material (e. g. machine
screws). There is risk of injury when run-
ning in the screw head!
Safety instructions.
!
Risk of injury
Only position the power tool onto the
screw whilst it is switched off.
Only work with the additional handle
attached and grip the power tool firmly.
Otherwise you could twist your wrist if
the power tool suddenly slowed down.
Beware of any concealed electric cables,
gas or water conduits; check the working
area with a metal detector, for example.
Do not rivet or screw any name-plates or
signs onto the power tool. The protective
insulation can thereby be rendered inef-
fective. Adhesive labels are recom-
mended.
Only use an undamaged plug and cable.
!
Damage to property/material
Mains voltage must correspond with the
voltage specifications on the power tool.
Personal protective equipment.
When using this power tool wear the
following protective items:
sturdy shoes, hair net (for long hair).
EN
9