Cognex In-Sight 7000 Serie Guia De Inicio Rapido página 9

Mount the Vision System
Use the mounting screws to secure the vision system to a mounting surface.
1. Align the mounting block with the mounting holes on the vision system.
2. Insert the M3 screws (quantity 4) into the mounting holes and tighten the
screws using a 2.5mm hex wrench; the maximum torque is 0.9039 Nm (8
in-lb).
Connect the Light Cable (Optional)
Tip: The space between the vision system connectors is limited; it is
recommended to first connect the Light cable to ensure enough space for a
proper connection.
1. Connect the Light cable's M12 connector to the vision system's M12 LIGHT
connector.
2. Connect the other end of the Light cable to an external lighting device (for
example, a strobe light).
7