Initial Selections; Selecting The Input Signal; Selecting The On-Screen Menu Language - Panasonic TH-37PG9U Manual De Instrucciones

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Input terminal will not be selected if the terminal board is not installed into the
SLOT.
• Select to match the signals from the source connected to the component/RGB input
terminals. (see page 32)
• In 2 screen display, the same input mode cannot be selected for the main picture
and sub picture.

Selecting the On-Screen Menu Language

Press to select the input signal to be played back from
the equipment which has been connected to the Plasma
Display.
Input signals will change as follow:
INPUT1 INPUT2
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
INPUT3 PC IN
INPUT MENU
.......(Chinese)
.......(Japanese)
.......(Russian)
Русский
ENTER/
VOL
Swing up the door at "PULL".
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
INPUT LABEL
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD LANGUAGE
1/2
RGB
PC
OFF
OFF
OFF
OFF
ENGLISH ( US )
13