Rough Grinding; Switching Off (Tool Equipped With Switch-On Safety Interlock); Care, Maintenance, Transport And Storage; Care And Maintenance Of The Power Tool - Hilti AG 600-A36 Manual De Instalación

6 Operation
6.1 Grinding
CAUTION
Risk of injury. The accessory tool may suddenly stick or stall.
▶ Use the power tool with the side handle (or optional hoop grip) fitted and always hold the power tool
securely with both hands.
6.2 Cutting
▶ When cutting, apply moderate feed pressure and do not tilt the power tool or the cutting disc (when
working, hold at approx. 90° to the surface being cut).
For best results when cutting profiles and square tube, start cutting at the smallest cross section.
6.3

Rough grinding

CAUTION
Risk of injury. The abrasive cutting disc could shatter and flying fragments may cause injury.
▶ Never use abrasive cutting discs for grinding.
▶ Move the power tool to and fro while maintaining a 5° to 30° angle of attack and applying moderate
pressure.
◁ This will avoid overheating and discoloration of the workpiece and help ensure an even surface finish.
6.4 Switching on (tool equipped with switch-on safety interlock)
The on / off switch with safety lock (switch-on interlock) gives you full control of the switch function
and avoids unintentional starting.
1. Push the safety lock forward.
◁ The on/off switch is unlocked.
2. Press the on/off switch as far as it will go.
◁ The power tool's motor runs at no-load speed.
6.5

Switching off (tool equipped with switch-on safety interlock)

▶ Release the on/off switch.
◁ The safety lock jumps automatically into the locked position.
7

Care, maintenance, transport and storage

7.1

Care and maintenance of the power tool

DANGER
Electric shock due to breakdown of protective insulation. When working on metal under extreme
conditions, conductive dust (e.g. metal, carbon fiber) may accumulate inside the power tool, thereby
adversely affecting the protective insulation.
▶ Use a stationary dust extraction system when working under extreme conditions.
▶ Clean the air vents frequently.
WARNING
Electrical hazards. Improper repairs to electrical parts may lead to serious injuries.
▶ Electrical parts may be repaired only by trained electrical specialists.
12 English
Printed: 07.03.2018 | Doc-Nr: PUB / 5246614 / 000 / 01
12
2106619
*2106619*