Building In - Zanussi ZWI 71000 WA Manual De Instrucciones

Building in

This appliance has been designed to be built
into the kitchen furniture. The recess should
have the dimensions shown in picture A.
600
min.
596
560
min.
820
75
60
A
When installing the appliance into the kitchen
furniture ensure, if possible, the hoses are
placed in either of the two recesses on the
back of the appliance.
This will help to prevent the hoses from be-
coming kinked or trapped.
22
555
176,5
416
170
100
In a sink drain pipe branch. This branch
must be above the trap so that the bend is at
least 60 cm above the ground.
Directly into a drain pipe at a height of
not less than 60 cm and not more than 90
cm. The end of the drain hose must always be
ventilated, i.e. the inside diameter of the
drain pipe must be larger than the outside di-
ameter of the drain hose. The drain hose must
not be kinked.
818
B
Caution! Do not remove the screw 8 !
Preparation and assembly of the door
The machine is originally prearranged for the
assembly of a door opening from right to left.
In this case it is sufficient to screw in the
hinges (1) and the counter-magnet (6) provi-
ded with the appliance, at the right level (Fig.
B).
6
1
7
3
2
8
www.zanussi.com
5 4