LUND I-20255 Manual De Instrucciones página 3

3. Bolt the Bracket to the underside of the frame channel reusing the factory tow hook bolts, either with or
without the tow hook, (Figure 3). Do not fully tighten hardware at this time.
Reuse factory tow
hook hex bolts
Front
Fig 3
4. Repeat Steps 2—4 for passenger side Frame Mounting Bracket installation.
5. Carefully unwrap the Bull Bar. Select (1) Bull Bar Mounting Bracket. Bolt the Bracket to the Bull Bar
with (2) Bolt Assembly's, (Figure 4). Leave hardware loose at this time.
(2) Bolt
Assembly
6. Repeat Step 6 to install the passenger side Mounting Bracket.
Driver/left Frame
Mounting Bracket
(Fig 4)
Page 3 of 4
I-Sheet Number I-20255 Rev.A
REVOLUTION BULL BAR
07-16 TOYOTA TUNDRA
01/20/17