Publicidad
Idiomas disponibles
Idiomas disponibles
22.
Re-align bumper fascia bracket to marks previously
made and tighten the nut to a torque of 70 ft•lbs or
95 N•m
NOTE: Repeat for drivers side.
23.
FOR DIESEL ENGINES ONLY reinstall upper cooler
fastners and torque to 8 ft•lbs or 10.5 N•m
24.
Reinstall bumper facsia by first installing inner push
pins to lower engine cover. Next reconnecting fog lamp
harness. Making sure to re-attach diesel engine heater
harness retainer. Finally re-aligning bumper fascia fastner
studs to holes on bumper fascia bracket.
03/01/2010
7
K6860880
Publicidad
