Safety Notice - PAVO II Manual De Instrucciones

Read all instructions before use
Do not leave cable where other may trip
Do not attempt to open casing
Do not use if wet
Switch off and unplug when not in use
Do not cover the heat vents when in use
Before laminating it is advisable to carry out a test lamination to familiarise yourself and to make
sure that your machine is working correctly.
1. Remove all packaging and plug the machine into an appropriate socket.
2. Open the flap of the machine (the machine will automatically turn on).
3. With the dial, adjust the temperature to the right position according to
the laminating pouch thickness. The machine will reach the correct
temperature in approx 3mins.
4. When the ready light is on, insert the laminating pouch squarely and
centrally (with the sealed side first) into the back of the laminator.
You do not need to use a pouch carrier.
5. The pouch will automatically pass through the machine. Remove pouch
only when lamination is complete (pouch completely out).
6. To turn off close the flap and unplug the machine.
BE CAREFUL: If changing to a thinner pouch type allow time for the machine to cool to the correct
temperature. If changing from hot to cold lamination make sure machine is completely cooled.
LAMINATING MACHINE
S
AFETY
Do not touch the heat vents when the machine is
working,
Do not put any items through the heat vents.
Do not use if machine, cable, or socket is damaged
Wait for pouches to cool before handling, they may be
hot.
O
PERATING INSTRUCTIONS
N
OTICE
3