A. If the pouch is not well laminated or white traces appear, increase the temperature (turn the knob
that indicates the temperature clockwise). Wait a few minutes until the temperature light is lit.
Laminate.
B. If the pouch is wavy, it means that the temperature is too high. Lower the temperature by turning
the knob counter clockwise. Wait a few minutes. Laminate.
C. The Laminator is specially designed to take all types of pouches, with or without the use of
carriers. However, pouches from some brands may contain high levels of glue which may
overflow during the heating process. If you use these kits, we strongly advise the use of paper
carriers during lamination. This will prevent possible fouling of the rollers.
D. If you would like to cold laminate the pouches, adjust the temperature knob on "cold". If the
laminator is hot, please wait a few minutes until it cools down.
Laminating:
When laminating both hot and cold pouches we recommend that you leave minimum margin of
3mm / ⅛ inch around the edge. If laminating several objects, leave a space of 6mm / ¼ inch between
objects.
If you need to cut a pouch do so after laminating. Cut pouches can leak glue in to your machine.
Pouches are also easier to cut accurately when laminated.
The machine has a warranty of 2 years (the warranty is not applicable if the pouches has been
inserted in the wrong position/direction, or the machines has been used for an inappropriate
purpose).
Voltage....................................................................................................................220-240V
Power consumption.................................................................................................680W
Max width laminating .............................................................................................330mm/13''
Max thickness laminating .......................................................................................2x250mic
TROUBLESHOOTING
O
I
THER
NFORMATION
W
ARRANTY
T
D
ECHNICAL
ATA
4