Makita BBC300L Manual De Instrucciones página 12

Malfunction status
Motor does not run.
Motor stops in a while after
start.
Revolution does not achieve
the appropriate speed.
Cutting tool does not rotate:
stop the machine immediately!
Abnormal vibration:
stop the machine immediately!
Cutting tool and motor cannot
stop:
Remove the battery
immediately!
010856
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita equipment
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Nylon cutting head
•
Cause
Battery cartridge is not installed.
Battery problem (under voltage)
The drive system doe not work
correctly.
Rotation is reverse.
Battery is nearly flat.
Overheating.
Battery is installed improperly.
Battery power is dropping.
The drive system does
not work correctly.
Foreign object such as a branch is
jamming between the guard and the
cutting tool.
The drive system does not
work correctly.
One end of the nylon cord has
been broken.
The drive system does not work
correctly.
Electric or electronic malfunction.
or attachments
Only use accessory or
Pole hedge trimmer attachment
•
Pole saw attachment
•
Cultivator attachment
•
Makita genuine battery and charger
•
are
12
Action
Install the battery cartridge.
Recharge the battery. If recharging
is not effective, replace battery.
Ask your local authorized cervise
center for repair.
Change the direction of rotation
with the reversing switch.
Recharge the battery. If recharging
is not effective, replace battery.
Rest the equipment for a while.
Install the battery cartridge as
described in this manual.
Recharge the battery. If recharging
is not effective, replace battery.
Ask your local authorized cervise
center for repair.
Remove the foreign object.
Ask your local authorized cervise
center for repair.
Bump the nylon cutting head
against the ground during driving
the equipment to feed the cord.
Ask your local authorized cervise
center for repair.
Remove the battery and ask your
local authorized cervise center for
repair.