Front Vent; Leveling Instructions - Danby Silhouette Professional DAR055D1BSSPRO Manual Del Propietário

INSTALLATION INSTRUCTIONS
LOCATION
• Two people should be used when moving the
appliance.
• Remove interior and exterior packaging prior to
installation. Wipe the outside of the appliance
with a soft, dry cloth and the inside with a
lukewarm wet cloth.
• Place the appliance on a fl oor that is strong
enough to support it when it is fully loaded.
• Before connecting the appliance to a power
source, let it stand upright for approximately
6 hours. This will reduce the possibility of a
malfunction in the cooling system from handling
during transportation.
• This appliance is 23.8 inches (60.5 cm) wide
by 34.7 inches (88 cm) high (when installed
with leveling legs) by 25.9 inches (65.7 cm)
deep. Make sure that you leave the minimum
amount of space between the appliance and all
surrounding walls and vents.
• Casters are included with this appliance. If the
casters are install, the height increases to 36.4
inches (92.5 cm).
• WARNING: To avoid hazard due to instability
of the appliance, it must be fi xed in accordance
with the instructions.
• Keep fl ammable material and vapors such as
gasoline away from the appliance. Only use
nonfl ammable cleaner.
• This appliance is intended to be used in
household or camping and similar situations
such as:
• Staff kitchen areas in shops, offi ces and other
working environments;
• Farm houses and by clients in hotels, motels
and other residential type environments;
• Bed and breakfast type environments;
• Catering and similar non-retail applications;
• This appliance should not be exposed to rain.
• Do not overload the appliance.

FRONT VENT

This appliance is front breathing. Do not block the
front air vent as this will result in high operating
temperatures, higher energy usage and possible
system overheating and failure.

LEVELING INSTRUCTIONS

There is one adjustable foot on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling foot counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling foot clockwise until the
appliance is level.
AMBIENT TEMPERATURE LIMITS FOR
OUTDOOR USE
Do not install this appliance in a location where
temperature will fall below 41°F (5°C) or rise above
109°F (43°C).
Operating the appliance in an ambient temperature
which is too cold can cause the compressor to turn
off for too long, causing the internal temperature
in the appliance to rise, possibly resulting in loss of
contents.
For best performance, do not install the appliance
behind a cabinet door or block the front vent.
3