Caster Installation - Danby Silhouette Professional DAR055D1BSSPRO Manual Del Propietário

INSTALLATION INSTRUCTIONS
HANDLE INSTALLATION
To avoid damage during transportation, the handle
is shipped in packing foam on the front of the
appliance and must be installed by the end user.
The handle can be installed on either the left or right
side of the door depending on whether the door is
needed to open from the left or right side.
Note: See door reversal instructions if the default
door installation opening from the left side is
inconvenient.
To install the door handle:
1. Remove the screw hole covers found on the side
of the door. Save these hole covers for future
use.
2. Use a Phillips screwdriver and the provided
screws to install the handle on the side of the
door.

CASTER INSTALLATION

To reduce the risk of personal injury or property
damage, unplug the appliance and use two people
to complete the caster installation.
1. Place the appliance on its back. Protect the fl oor
and the back of the appliance from damage by
laying the appliance on a towel or blanket.
2. Remove the three solid feet. Unscrew the leveling
foot. Keep the solid feet and the leveling foot in
a safe place for future use.
3. Install the non-locking casters on the back of the
appliance.
4. Install the locking casters on the front of the
appliance.
Note: Once caster installation is complete, the
appliance must be allowed to stand upright for
6 hours before plugging in to avoid damage to
internal components.
4