Kohler K-15840 Guia De Instalacion página 3

Inlet
1. Install the Faucet Body
Apply a bead of plumbers putty or other sealant to the underside
of the undercover according to manufacturer's instructions.
Position the undercover over the mounting holes. Press the
undercover down until it is snug against the sink.
From the top of the sink, insert the faucet body inlets into the
mounting holes.
From the underside of the sink, thread a nut onto each handle
valve.
Securely hand tighten the nuts.
Remove any excess putty or sealant.
Kohler Co.
Valve Stem
Undercover
Apply
Plumbers
Putty.
Nut
3 1010459-2-B