BEFORE FIRST USE
The battery must be fully charged before first use. Use only the provided Micro USB charging cable.
CHARGING
1. Plug the USB Micro connector of the supplied cable into the Micro USB socket (2) on your device.
2. Connect the USB connector (6) to a USB power source. It can be a 230V USB charger for the phone or a USB socket for a computer.
The charging status indicator inside the device handle blinks red. The fan is fully charged after 3 hours.
3. After charging is complete, disconnect the USB cable from the fan and the USB power source.
Product Description: Mini USB fan with AD7331 stand function
1. Power ON/OFF and fan speed button
3. Propeller
5. Neck strap
7 Battery compartment
USE OF THE DEVICE
1. Press the ON / OFF button (1) once to turn on the device and obtain a low airflow rate. For medium velocity air flow, briefly press the
ON / OFF button (1) twice. For quick airflow, briefly press the ON / OFF button (1) three times. To turn off the device, briefly press the
ON / OFF button (1) four times.
2. The charging status indicator inside the handle of the device flashes blue when the battery is low and about to stop working.
3. A neck strap (5) is included with the kit. Fix the loop by threading it as shown at picture on page 2, through the hole on the bottom of
the fan,
and then tie it.
4. A stand (4) has been added to the set, into which you can insert the fan to work in a stable position.
CLEANING AND MAINTENANCE
1.The product is maintenance-free.
2. Before cleaning the device remove the USB cable and batteries.
3.Only use a dry and soft cloth for cleaning. Do not use cleaning agents and chemicals. To remove dust from grills may occasionally be
wiped with a brush.
4. Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
Rechargeable battery
Important safety information about Rechargeable battery
These precautions apply to products using rechargeable batteries (rechargeable batteries).
The battery may leak, overheat, or explode if mishandled. Released electrolyte is a source of corrosion and may be toxic. May cause
burns to skin and eyes; it is also harmful if swallowed.
To reduce the risk of an injury:
* Keep the batteries out of the reach of children.
* Batteries should not be heated, opened, punctured, destroyed, or thrown into fire, and should not be reinserted into the device. Pay
particular attention to the [+] and [-] markings.
* Do not touch the battery terminals in the device with metal objects. These parts can become hot and may cause burns.
* If the batteries are exhausted or if the device is to be stored for a long time, remove the batteries.
* Old, exhausted or exhausted batteries must be removed from the device and disposed of or recycled in accordance with national
waste disposal regulations.
* In the event of battery leakage, remove the batteries, avoiding the leaking electrolyte coming into contact with skin or clothing. If any
battery fluid contacts your skin or clothing, wash it immediately with water. Before inserting a new battery, clean the battery
compartment thoroughly with a damp paper towel
Caution There is a risk of explosion if the battery is replaced with an incorrect type. Only use a battery of the same type and rating as
the one supplied with the device. Charging should be performed only with the use of the charger delivered with the product or suitable
for the given type of battery.
Chemical composition of the battery used: Lithium-ion (Li-Ion)
TECHNICAL DATA
Power input: USB 5V
USB cord with USB A connector and USB B micro plug, 72cm length
Rechargeable battery: 3,7V 2000mAh Type: 18650, Lithium-Ion Battery, 44 grams
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
2. Micro USB socket on the device
4. Stand
6. USB connector
1A
Power: 4,5W
4