Hot Surface - Viavi 8800 Serie Manual De Instrucciones

Safety Symbols in Manuals and on Units
CAUTION: Refer to accompanying documents. (Symbol refers to specific CAUTIONS represented on the Unit and
clarified in the text.)
Indicates a Toxic hazard.
Indicates item is static sensitive.
AC TERMINAL: Terminal that may supply or be supplied with AC or alternating voltage.
Indicates a fuse (AC or DC).
HOT SURFACE: This surface may be hot to the touch.
Case, Cover or Panel Removal
Opening the Case Assembly exposes the operator to electrical hazards that may result in electrical shock or equipment damage. Do
not operate the Digital Radio Test System with the Case Assembly open.
Equipment Grounding Protection
Improper grounding of equipment can result in electrical shock.
Power Cords
The AC Power Cord included with the Digital Radio Test System, or an appropriate replacement, should be used to connect the
Digital Radio Test System to a grounded AC power supply. Failure to ground the Digital Radio Test System may expose the operator
to hazardous voltage levels. To connect the Digital Radio Test System to a Class II (ungrounded) 2-terminal socket outlet, fit the
power cord with either a 3-pin Class I plug used in conjunction with an adapter incorporating a ground wire or fit the power cord with a
Class II plug containing an integral ground wire. The ground wire must be securely fastened to ground; grounding one terminal on a
2-terminal socket does not provide adequate protection. Power cords must be in good operating condition. Power cords must not be
frayed or broken, nor expose bare wiring. Using a damaged power cord may expose the operator to hazardous voltage levels.
8 8 0 0 S e r i e s G e t t i n g S t a r t e d M a n u a l