Changing the batteries
Ensure +/- terminals are the correct way round.
Setting Real Time Clock
1. When the batteries are inserted, TIME will enter automatically. "TM" will
flash during the TIME setting mode. Otherwise, press and hold SET key for 2
seconds to enter TIME setting under clock mode.
2. Press HRS key to adjust the hour figure.
3. Press MIN key to adjust the minute figure
4. Press SET key once to make the final confirmation and "TM" stops flashing.
5. The display will only show in the setting mode for 20 seconds if there is no
operation.
24 hr display format will be shown only when g unit is selected
12 hr display format will be shown only when lb unit is selected
7