Descargar Imprimir esta página

Setting The Timer - Duronic KS4000 Manual De Instrucciones

Ocultar thumbs Ver también para KS4000:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Setting The Timer

1. Press SET key to enter TIMER mode and display which will show "00:00"
and "TMR".
2. Press and hold for 2 seconds to enter TIMER SET mode and then "TMR"
will flash.
3. Press HRS key to adjust the hour figure.
4. Press MIN to adjust the minute figure.
5. Press SET key once to confirm and "TMR" will stop flashing. The time
counting will now begin.
6. When the time counting is complete, you will hear beeping for 20 seconds.
7. Press "HRS" or "MIN" or "SET" to stop the alarm.
8. Your kitchen scale will return to clock mode 40 seconds after the alarm.
To Weigh
1. Place your scale in an upright position.
2. Press ON/OFF button to turn on the scale.
3. Wait until the display shows "0.0".
4. Press UNIT button to select desired unit.
5. Now place the item you wish to weigh on the
round glass platform.
6. The weight will be displayed.
7. The scales will return to clock mode automatically
if no operation is apparent in 60 seconds.
8

Publicidad

loading