Cequent 75528 Instrucciones De Instalación página 5

Using fascia removing tools, carefully remove rear fascia starting from (1) wheel
well and working around to the other.
Raise Hitch into Position – Over the exhaust pipes, aligning the slots in the
4.
hitch with the weldnuts in the bottom of the frame rails.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
3.
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Lower Exhausts – Detach the rubber exhaust hangers and lower the rearward
portion of the exhaust ((2) on single exhaust or (4) on dual exhaust). Support
Exhaust to Prevent Damage.
Install Side Fasteners – Loosely install the M12 bolts and 1/2" conical washers
5.
in existing weldnuts in frame on each end of Hitch.
Sheet 5 of 18 75528NP 7-8-16 Rev. B