Software Update Settings - Onkyo BD-SP309 Manual De Instrucciones

5. Press / to select "Erase" or "Format", then
press ENTER.
Erase: Deletes only BD-VIDEO data written
on the USB memory device such as BD-
LIVE data.
Format: Be aware that all data including
BD-VIDEO data and software update data
will be deleted.
• If you want to delete only the unneeded
software update data after the software is
updated, delete the data on the USB memory
device using a PC.
Erase Erases BD-VIDEO data on USB memory.
Format Erase all contents on USB memory
including protected contents.
6. Press / to select "Yes", then press ENTER.
• A con¿ rmation message is displayed. Check
that the correct USB memory device is
displayed, and then continue.
7. Start the process.
• The screen for the current operation will
display.
8. Press ENTER.
9. Press HOME or EXIT to exit.
NOTE
• Data which has been saved to the player's
internal memory (game score, etc.) will also be
deleted.
Complete
OK

Software Update Settings

In this player, the software version can be updated
using either one of the following methods.
• Auto Update from Network
• Manual Update from Network
• Manual Update from USB memory device
CAUTION
• Do not remove the LAN cable or unplug the AC
cord while downloading or updating software.
Auto Update from Network
This function allows you to perform the update by
accessing an Internet connection automatically to
check if there is a new ¿ rmware version every time
the player is turned on.
NOTE
• Make sure that the LAN cable is connected to
this player (see page 18).
• Make sure to perform the communication
settings (see page 45).
Setup
1. Press / to select "Settings", then press
or ENTER.
2. Press / to select "Software Update
Settings", then press
3. Press / to select "Auto Update Setting",
then press or ENTER.
4. Press / to select "Yes", then press ENTER.
• After this, an Internet connection will be
made automatically every time this player is
turned on.
or ENTER.
En
47