Raider PRO RDP-BD05 Manual Del Usuario página 12

12 www.raider.bg
they will operate properly and perform their intended functions. Check for alignment of moving
parts, binding of moving parts and breakage of parts. Check for proper mounting of all parts and
any other conditions that may affect their operation. A guard, switch or other part that is damaged
or defective should be properly repaired or replaced by a qualified person. Do not use tool, if switch
does not turn it on and off;
22. Warning! Use the tool and its accessories in accordance with these safety instructions and
in the manner intended for the particular tool, taking into account the working conditions and the
work to be performed. Use of the tool for operations, different from those normally expected to be
performed by the particular tool, could result in a hazardous situation;
23. Have the tool repaired by a qualified person
This electric tool is in accordance with the relevant safety rules. Repairs should only be carried
out by qualified persons using original spare parts, otherwise this may result in considerable danger
for the user;
USE
Insert the appropriate drill bit
The choice of drill bit is directly dependent on the material that will handle (see tech. Attributes)
Attention! Placing the drill bit must always be carried off in the machine.
Put up in drill chuck. Tighten using a key from the set. Check the tightening of the drill by placing
the key in the three successive opening of the chuck. Remove the key from the hole before turning
in contact drill.
INCLUSION
1. Press the power button and start the drill.
2. With the switch to speed you can select the speed that would be most appropriate depending
on the material to handle.
EXCLUSION
Press the exclusion and thus the machine is brought to rest.
Securing details of that process. Use a vise.
Do not use force in stopping the rotating parts.
In the presence of mechanical or electrical breakdown, immediately turn off the drill.
Use safety glasses when handling metal and wooden parts.
Environmental protection.
In view of environmental power, additional accessories and packaging must be subjected to appropriate
processing for reuse of the information contained in these materials.
Do not dispose of household waste power! Under the EU Directive 2012/19/EC on scrapped electrical and
electronic equipment and promoting law and national power, which can be used more, must be collected
separately and be subjected to appropriate processing for recovery of contained therein scrap.