4.6 RESTART DELTA FUNCTION
To set the restart delta value:
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Select submenu
d)
e) Press the
To set the restart delta value:
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Select submenu
d)
e) Press the
4.7 MANUAL ACTIVATION OF THE LOAD SYSTEM
is possible.
On the control panel of the stove:
a) Using the arrow keys
b) Select password "7" with the key
c) Scroll with the key
d) Select password "54" with the key
e) Holding the key
f) Releasing the key will end the load operation.
Attention!
• This function is only active when the stove is off and cold.
• Before switching on again, ensure that there are no pellets in the grate.
to go to the setup menu
[8]
and press
to go to the setup menu
[8]
and press
the load system will activate and the display will show the incremental bars
is the number
and then press
0,5 ... 5,0
and
buttons (
and then press
0 ... 40
and
buttons (
°C);
and press the key
;
[3 1 ]
;
;
;
;
°C);
;
;
;
25