Safety Regulations; Intended Use; Safety Instructions; Symbol Description - DURAVIT D-Code 700065 Manual De Instrucciones

1. Safety regulations

Please read these user instructions carefully. In particular, note the safety
instructions. Please keep the instructions safe for further reference.

INTENDED uSE

The bathtub is intended solely for domestic/hotel use and not for public
baths/areas.
The bathtub is intended for indoor use only.
This product is intended only for use by adults.
Any use other than or beyond that described in these user instructions
shall be deemed misuse and shall result in annulment of all warranty and
liability obligations.

SaFETy INSTRuCTIONS

Please read and follow the safety instructions below carefully.
waRNINg!
Children must not use the bathtub unsupervised. Elderly, frail or disabled
persons should use the bathtub under supervision.
CauTION!
It is recommended to build up the time spend in with massage slowly, this
allows the body to get used to the massage effect.
NOTE!
Only use Bath essences for whirtubs. The use of bath foam is not advisa-
ble.
ExEMPLIFICaTION OF ThE uSED SyMBOLS
The following symbols and warnings are employed in the user instruc-
tions:
waRNINg!
Indicates a possible imminent danger!
Non-observance of these instructions can lead to health risks or life-
threatening injuries and to damage to material property.
CauTION!
Indicates a dangerous situation!
Non-observance of this instruction can lead to light injuries or damage to
material property.
NOTE!
Gives information on application and other useful issues.
6
BAL_53483/10.10.2

2. Jet-System

6 side mounted jets create maximum hydrotherapeutic action with actua-
ted intensity of the massage.
AIR
Jet-Taste
The button for the jet system ac-
tivates side massage jets.
AIR
Luftregler
CONTROL OF ThE MaSSagE PRESSuRE
The intensity of the Jets can be set
by the Air regulator on the tub rim.
Turning the regulator clockwise will
reduce the massage pressure, tur-
ning anticlockwise increases the
massage pressure.
The direction of the jets can be set
at each Jet nozzle.