Cisco WRT400N Instalación Y Configuración página 5

Telstra
Telstra is a service used in
Australia and New Zealand
only . If you are using an HBS
connection, check with your ISP
for setup information .
L2TP
L2TP is a service used in Israel
only . If you are using\ an L2TP
connection, check with your ISP
for setup information .
5.
After you have entered your Internet Connection Type settings, click
Save Settings .
NOTE:
wireless network . To configure wireless security, select the security
method you want to use on the Wireless > Wireless Security screen .
For detailed configuration information, refer to the utility's online
help .
6.
Power off the broadband modem, computers, and network devices
and then power them on again so that the network devices obtain the
Router's new settings .
7.
Open a web browser from any computer . In the browser's Address field,
enter www.linksysbycisco.com/registration and press Enter . The
installation is now complete .
You should configure wireless security to help protect your
Telstra
L2TP
4