Technical Data; Noise Information; English; General Safety Warnings - AEG BPS18-254BL Manual Original

TECHNICAL DATA

Mitresaw *
Production code
Battery voltage
No-load speed
Saw blade dia. x hole dia
Saw blade body thickness
Saw blade tooth thickness
Max. cutting capacity
Mitre 0°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 45°/ Bevel 45°
Mitre 45°/ Bevel 45°
Min. workpiece dimensions
Weight according EPTA-Procedure 01/2003 (Li-Ion 5.0 Ah)

Noise information

Measured values determined according to EN 61029. Typically, the A-weighted noise levels of the tool are:
GB
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 61029
Sawing of wood: Vibration emission value a
Uncertainty K=
PS Mitresaw
*
^
=
WARNING!
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in EN
61029 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accesso-
ries, keep the hands warm, organisation of work patterns.

English

26
h
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

GENERAL SAFETY WARNINGS

When using electric tools basic safety precautions should
always be followed to reduce the risk of fire, electric shock
and personal injury including the following. Read all these
instructions before attempting to operate this product and save
these instructions.
Keep work area clear. Cluttered areas and benches invite
injuries.
Consider work area environment. Do not expose tools to rain.
Do not use tools in damp or wet locations. Keep work area well lit.
Do not use tools in the presence of flammable liquids or gases.
Guard against electric shock. Avoid body contact with earthed
or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
Keep other persons away. Do not let persons, especially chil-
dren, not involved in the work, touch the tool or the extension cord,
and keep them away from the work area.
Store idle tools. When not in use, tools should be stored in a dry
locked-up place, out of reach of children.
Do not force the tool. It will do the job better and safer at the
rate for which it was intended.
WARNING Read all safety warnings and all instruc-
WARNING
BPS18-254BL
4601 74 01...
... 000001-999999
18 V
3900 min
-1
254 × 30 mm
1,6 mm
2,2 mm
90 mm × 305 mm
39 mm × 305 mm
43 mm × 305 mm
90 mm × 215 mm
50 mm × 215 mm
39 mm × 215 mm
43 mm × 215 mm
215 × 35 × 2,5 mm
16,3 kg
89,0 dB (A)
98,5 dB (A)
1,1 m/s
2
1,5 m/s
2