Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Passenger side shown, driver side similar.
NOTE: Follow steps 8 10 for installation on both
driver and passenger side.
8. Verify the location label (6) is on the correct side of the
vehicle.
9. Connect the tail lamp electrical connector (4) to the
trailer tow harness connector (2) and the body har
ness connector (5) to the trailer tow harness (2) and
position the tail lamp (3) into the vehicle.
10. Install the tail lamp retainers (1).
11. Using the provided retainers (1), install the 7 Way
Trailer Tow Outlet to the hitch.
12. Connect the harness connector (1) to the back of the
7 Way Trailer Tow Outlet (2).
13. Zip tie (3) any extra wire hanging down below the fas
cia to the fascia support.
Oct 11, 2010
3
K6861106 Rev. 1
Publicidad
