Publicidad
Idiomas disponibles
Idiomas disponibles
6
21. Remove the TIPM cover.
22. Route the trailer harness around the back of the TIPM
and down between the fender and the TIPM.
23. Remove the TIPM B+ retainer.
24. Install the red wire with eyelet to the TIPM B+ (2).
25. Remove the hood switch bracket retainer (1) and in
stall the white wire with eyelet.
26. Zip tie the fuse holder (1) to the hood release cable
(2).
27. Make a small hole in the hood cable rubber grommet
(1).
28. Route the blue trailer brake wiring (2) along the hood
cable (3) and through the grommet (1) into the pas
senger compartment.
Oct 11, 2010
K6861106 Rev. 1
Publicidad
