Mopar 82213142 Instrucciones De Montaje página 2

1. Open the hood.
2. Disconnect the negative battery cable.
3. Raise and support the vehicle.
4. Remove both front wheels.
NOTE: Driver side splash shield is a two piece assembly
to enable easy access for battery removal.
5. Remove the front half of splash shield.
6. Remove push pins (3).
7. Remove fasteners (2).
8. Remove splash shields from wheel wells.
9. Remove the fascia lower closeout panel (1).
10. Remove fasteners (5) to lower closeout.
Remove push pins (1) to lower closeout.
11.
7/27/2012 Page 2 of 27 K6861392