Test Leads; Measurements; Ac/Dc Current Measurements - Sonel CMP-1006 Manual De Uso

F
Hz
o o
F i C
n, m, μ, M, k - Unit of measure prefixes: nano, milli, micro, mega,
·)))
4.3

Test leads

The manufacturer guarantees correct measurement indications
provided original test leads are used.
Connection of inadequate test leads constitutes a risk of
electric shock with a dangerous voltage or may be a cause of
measurement errors.

5 Measurements

It is recommended to get acquainted thoroughly with the con-
tents of the present chapter since it describes the measurement
systems, the manner of realisation of measurements and the basic
principles of interpretation of the results. Set the function select
switch to the OFF position when the meter is not in use.
5.1

AC/DC current measurements

Do not measure current on a circuit whose voltage exceeds
600V AC. Do not take current readings on circuits where the
maximum current potential is not known. Do not exceed the
maximum allowable input range while measuring current.
32
- Farad (Capacitance)
- Hertz (Frequency)
- Fahrenheit and Celsius units (Temperature)
and kilo
- Continuity test
- Diode test
WARNING:
WARNING:
CMP-1006 – USER MANUAL