Material Properties Of Metal Parts - TEUFELBERGER PLOOPIES Manual Del Usuario

MATERIAL PROPERTIES OF METAL PARTS

material datasheets and were not measured on the actual product. Certain factors may affect these va-
lues (e.g. an anodizing layer will drastically reduce electrical conductivity).
Material
Electrical properties
Specific electrical
resistivity
Electrical resistivity
Moisture take-up
Chemical resistance
Resistance against acids
Resistance against alkali
Behaviour if soiled
Thermal properties
Thermal conductivity
Operating temperatures
of pulley
Ice
INTENDED USE
Weathering
UV stability
Burning behaviour
Disposal
Stainless steel 174 PH
Ωcm 8*10
Ω
%
Strong acids and alkalis
may have a corrosive
effect. If contamination
occurs, clean and inspect
in accordance with user
instructions of pulley
Certain contaminants may
have a corrosive effect.
Contaminants may impede
the correct function of
mechanisms.
Regularly clean, maintain
and inspect in acc. with
user instructions of pulley.
W/mk 178.4
Suitable for normal clima-
tic temps (-40 to +50 °C)
No effect if > -40°C
Certain environmental
conditions may have a
corrosive effect. Regu-
larly clean, maintain and
inspect in acc. with user
instructions of pulley.
No effect in normal
climatic conditions
Does not burn
Widely recycled
Aluminium ASTM 7075
6
(Anodizing layer reduces
0
Strong acids and alkalis
may have a corrosive
effect. If contamination
occurs, clean and inspect
in accordance with user
instructions of pulley.
Avoid contact with chemicals!
Certain contaminants may
have a corrosive effect.
Contaminants may impede
the correct function of
Regularly clean, maintain
and inspect in acc. with
user instructions of pulley.
Suitable for normal clima-
tic temps (-40 to +50 °C)
No effect if > -40°C
Certain environmental
conditions may have a
corrosive effect. Regu-
larly clean, maintain and
inspect in acc. with user
instructions of pulley.
Anodized layer may fade
5.15*10
6
conductivity)
0
mechanisms.
130
Does not burn
Widely recycled
5