1. Remove the screw in the
instrument panel to the right of
the "engine start" button then
unclip the top panel of the steering
column then unclip and remove the
instrument panel. (Figure A)
2. Remove the screw in the dash
panel above the glove box to the
right of the radio then unclip and
remove the dash panel. (Figure B)
3. Remove the two screws from the
from the radio panel, unclip and
remove. (Figure C)
(Figure A)
Dash Disassembly
(Figure B)
(Figure C)
95-7344
4. Unscrew the (4) Phillips screws
securing the radio into the dash,
unplug and remove the radio.
(Figure D)
5. Remove the (4) screws securing
the display into the factory panel
and unclip the hazard button. Both
items will need to be installed into
the 95-7344 kit panel. (Figure E)
Continue to kit preparation
Display
screws
(Figure E)
2
(Figure D)
Hazard
button