1. Unclip and remove A/C control
panel. (Figure A)
2. Remove (4) 10 mm bolts securing
radio. (Figure B)
3. Unclip and remove entire panel
including hazard switch and clock.
(Figure C)
Dash Disassembly
TEXT
PWR VOL
SCAN
(Figure A)
(Figure B)
TEXT
PWR VOL
SCAN
(Figure C)
99-8235
4. Remove the left and right radio
brackets from the radio chassis.
(Figure D)
5. Unclip and remove the clock/
hazard switch assembly from the
factory radio housing trim panel.
(Figure E)
Continue to kit preparation
2
(Figure D)
(Figure E)