Metra 95-70166H6 Manual Del Usuario página 3

1. Attach the included panel clips
to the 95-7016GHG trim panel.
(Figure A)
2. Connect the brackets to the radio
housing trim panel.with the (4)
#8 x 3/8" Phillips screws supplied.
(Figure B)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
95-7016GHG
Dash Disassembly
(Figure A) (Figure B)
3
(Figure C)