Technical Data; Ec Declaration Of Conformity - DeWalt DW712 Manual De Instrucciones

MITRE SAW DW712, DW712N
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional power tool users.

Technical Data

Sound pressure (L )
pA
Acoustic power (L )
WA
Hand/arm weighted vibration
Voltage
(UK & Ireland only)
Power output
Current input (230V)
Current input (115V)
Blade diameter
Blade bore
Max. blade thickness
Blade speed
Max. crosscut capacity at 90˚
Max. mitre cut capacity at 45˚
Max. depth of cut 90˚
Max. depth of bevel cross-cut 45˚
Mitre (max. positions)
left
right
Bevel (max. positions)
left
right
0° mitre
Resulting width at max. height 70 mm
Resulting height at max. width 300 mm
45° mitre left
Resulting width at max. height 70 mm
Resulting height at max. width 212 mm
45° mitre right
Resulting width at max. height 70 mm
Resulting height at max. width 212 mm
45° bevel left
Resulting width at max. height 50 mm
Resulting height at max. width 300 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 254 mm
Blade stopping time
Dust collection efficiency
Weight
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
WALT one of the most
E
DW712 DW712N
dB(A) 90 90
dB(A) 103 103
m/s < 2.5 < 2.5
2
V 230 230
V 230/115 230/115
W 1600 1600
A 8 8
A 16 16
mm 216 216
mm 30 30
mm 1.8 1.8
min- 3,500–4,600 5,400
1
mm 300 300
mm 212 212
mm 70 70
mm 50 50
50˚ 50˚
60˚ 60˚
48˚ 48˚
2˚ 2˚
mm 300 300
mm 70 70
mm 212 212
mm 70 70
mm 212 212
mm 70 70
mm 300 300
mm 50 50
mm 65 65
s < 10 < 10
mg/m < 2.0 < 2.0
kg 19.0 19.0
10 Amperes, mains
13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DW712/DW712N
D WALT declares that these products described under "technical data"
E
have been designed in compliance with:
98/37/EEC, 89/336/EEC, EN 55014-2, EN 55014, EN 61000-3-2,
EN 61000-3-3 & EN 61029.
For more information, please contact D
or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
TUV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stin 1
D-51105 Köln
Germany
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
E NG L I S H
WALT at the following address
E
WALT.
E
23