Technical Data; Definitions: Safety Guidelines - DeWalt DWE7485 Traducido De Las Instrucciones Originales

EnGLIsh
TABLE SAW
DWE7485
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage V
DC
Type
Rated input power W
No load speed min
Blade diameter mm
Blade bore mm
Blade kerf mm
Blade body thickness mm
Riving knife thickness mm
Depth of cut at 90° mm
Depth of bevel cut at 45° mm
Ripping capacity mm
(Right of blade)
Ripping capacity (Left of blade) mm
Work surface dimensions mm 485 x 485 485 x 485
Overall dimensions mm 605 x 605
Weight kg
Noise values and/or vibration values (triax vector sum) according to
EN62841-1-2015:
L (emission sound pressure dB(A)
PA
level)
L (sound power level) dB(A)
WA
K (uncertainty for the given dB(A)
sound level)
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
32
WALT one of the
e
DWE7485 DWE7485 DWE7485
(QS, GB) (XE) (LX)
230 220–240 115
3 3 3
1850 1850 1700
-1 5800 5800 5800
210 210 210
30 30 30
2.4 2.4 2.4
1.6 1.6 1.6
2.2 2.2 2.2
65 65 65
45 45 45
622.3 622.3 622.3
318 318 318
485 x 485
605 x 605 605 x 605
x 330 x 330 x 330
22 22 22
90 90 91
107 107 108
3 3 3
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
Table Saw
DWE7485
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015,
EN62841-3-1:2014+AC:2015 + A11:2017.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
25.01.2020
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
WALT at
e
WALT.
e