Warning:
• Never place the feeding bottle warmer directly under tap water; do not submerge the equipment,
plug or power cable in water or other liquids.
• Never clean the feeding bottle warmer in a dishwasher.
• Clean the external parts of the feeding bottle warmer with a damp cloth.
• The normal use of the equipment could cause the formation of scale residues in the heating cham-
ber, which could reduce the performance of the equipment and even damage it over time. To remove
the scale residues from the bottom of the chamber, ensure that the feeding bottle warmer has
completely cooled down; pour a solution of water and white vinegar inside the chamber and leave
overnight. Then rinse thoroughly, and carry out a warming up cycle without placing any feeding
bottles or baby food jars inside the equipment. Warning: Never switch on the feeding bottle warmer
when the chamber contains a solution of water and vinegar. After carrying out the descaling cycle,
rinse the inside of the chamber thoroughly. Then pour 140 ml of water into the chamber and carry
out a warming up cycle without placing any feeding bottles or baby food jars inside the equipment.
When the green warning light lights up, switch off the equipment, and let it cool down completely.
Remove any residues of water and dry thoroughly.
• It is recommended to remove any scale residues at least once a week, or more frequently if the water
is particularly rich in calcium.
• Do not use tools, abrasive sponges, or solvents to clean the equipment: it may damage the feeding
bottle warmer and/or its accessories.
VI. TECHNICAL DATA
Model MEC-6035
Voltage 220-240 V~ 50Hz
Heater element power 95 W
Tested by the Italian Institute of Quality Brands.
Handle with care during use. Danger of burns!
WARNING: Please read carefully the instructions enclosed before use.
WARNING: Dispose of it at an appropriate differentiated collection point, as reque-
sted by the laws in force
Equipment approved to EC regulations in force
Made in China
11