D Using the Built-in Flash
In indoor, low light or backlit conditions in daylight, just raise the built-in
flash and press the shutter button to take flash pictures. In the <d>
mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set
automatically to prevent camera shake.
26
Raise the built-in flash with your
1
fingers.
In Creative Zone modes, when you
raise the flash, you can take flash
pictures anytime.
While the flash is recycling, "DbuSY"
is displayed in the viewfinder, and
[BUSYD] is displayed on the LCD
monitor.
Press the shutter button halfway.
2
In the bottom left of the viewfinder,
check that the <D> icon is lit.
Take the picture.
3
When focus is achieved and you
press the shutter button completely,
the flash will fire at all times.
When you finish shooting, push down
the built-in flash with your fingers.