Fitting Instructions - Thuasne Dynastab Dual Manual Del Usuario

WRIST IMMOBILISATION
ENG
SPLINT
Properties:
• 2 removable stays to fit the orthosis to the wrist.
• Removable strap to optimise hold of the orthosis.
• Use of breathable materials.
Indications:
• Mild sprains of the wrist (functional treatment).
• Tendinitis and tendon disorders of the wrist.
• Inflammatory phases of rheumatic diseases.
Contraindication:
Do not apply the product in direct contact with broken skin.
Side effects:
No side effects are as yet known for correct use.

Fitting instructions:

1. Pull the orthosis over the wrist to be immobilised, leaving the straps
on the outside, and find the two stay covers.
2. Slip the metal stay (C) into the stay cover located on the inside of the
hand (from the bottom).
To do this, the inscription on the stay must be towards the elbow and
facing you. Once on, it must mould to the shape of your palm.
3. Insert the plastic stay (D) into the second stay cover.
4. Strap a: take it round your hand and insert the strap into the
tightening buckle. Adjust it to your anatomy using the Velcro.
5. Strap b: take it round the wrist and insert the strap into the tightening
buckle. Adjust it to your anatomy using the Velcro.
Precautions:
Follow the advice of the health professional who prescribed or supplied
the product. Consult your health professional if discomfort occurs.
Store at room temperature, preferably in its original packaging.
For hygiene and performance reasons, do not re-use the product for
another patient.
Washing instructions:
- See product label.
- Do not use detergents, fabric softeners or aggressive products
(products containing chlorine)
- Squeeze out excess water.
- Dry away from heat sources.
- Remove metal stays before washing.
Composition:
See product label.
Keep this instruction leaflet.