Storage; Disposal - Atlas Copco DKR 36 Instrucciones De Seguridad Y De Funcionamiento

DKR 36, 36R
A
C
♦ Be sure that the straight spline on the piston (A)
engages the straight spline on the chuck sleeve
(B), and that the spiral spline on the piston (A)
engages the spiral spline of the ratchet ring (C).
♦ Assemble the ratchet ring (C) into the fronthead
(D), so that the flat surface marked T faces the
cylinder (E).
♦ Tighten the side bolts stepwise to the correct
torque. After tightening, rotate the chuck manually
to make sure that the rotation is free.

Storage

● Clean the machine properly before storage, in
order to avoid hazardous substances. See "Dust
and fume hazard"
Pour approximately 1 ⁄
●
2
the air inlet nipple, connect the machine to the
compressed air supply and start it for a few
seconds.
Always store the machine in a dry place.
●
© 2015 Construction Tools PC AB | No. 9800 0938 90d | 2015-03-26
Original instructions
E
D
B
oz (5 cl) of oil directly into
Safety and operating instructions

Disposal

A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
19