Technical Data; Machine Data; Noise And Vibration Declaration Statement - Atlas Copco DKR 36 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Technical data

Machine data

Shank dimension
Type
DKR 36 Round 19 - Hexagon 14.7 x 89
(Round
DKR 36R
Air inlet
Type
DKR 36
DKR 36R

Noise and vibration declaration statement

Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11203.
Vibration value A and uncertainty B determined according to EN ISO 28927-10. See table "Noise and vibration
data" for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
20
mm
(in.)
3 ⁄ - Hexagon 9 ⁄ x 3 1 ⁄ )
4 16 2
Round 19 x 95
(Round 3 ⁄ x 3 3 ⁄ )
4 4
in.
3 ⁄ BSP
8
3 ⁄ BSP
8
Weight Piston bore
kg mm
(lb) (in.)
4.5 31.8
(10) (1 1 ⁄ )
4
4.5 31.8
(10) (1 1 ⁄ )
4
Exhaust port
in.
1 ⁄ NPT
4
1 ⁄ NPT
4
© 2015 Construction Tools PC AB | No. 9800 0938 90d | 2015-03-26
DKR 36, 36R
Stroke length Overall length
mm
(in.)
35
(1 3 ⁄ )
8
35
(1 3 ⁄ )
8
Air consumption Impact rate
(6 bar)
l/s
(cfm)
10
(21)
10
(21)
Original instructions
mm
(in.)
375
(14 3 ⁄ )
4
375
(14 3 ⁄ )
4
(6 bar)
Hz
(bpm)
47
(2820)
47
(2820)