Black and Decker Dustbuster FV750 Manual De Instrucciones página 6

ENGLISH
Fig. A
6. Extension tubes
7. Crevice tool
8. Brush tool
Assembly
Warning! Make sure that the appliance is switched off and
unplugged.
Raising and folding the handle (fig. B)
Raising
Press the release button (9).
x
Raise the handle until it clicks into place.
x
Folding
Press the release button (9).
x
Lower the handle until it clicks into place.
x
Fitting and removing the hand-held vacuum cleaner (fig. C)
Fitting
Position the front (10) of the appliance in the lower part (11)
x
of the base.
Push the back end of the appliance down into the base (12)
x
until a click is heard.
Removing
Hold the appliance at the handle.
x
Keep the release button (2) depressed.
x
Pull out the back end of the appliance.
x
Lift the appliance off the base.
x
Fitting the suction head (fig. D)
Slide the head (5) into the nozzle of the base (12).
x
To remove the head, pull it off the base.
x
Fitting the accessories (fig. E)
The accessories provided can be used in various combinations,
depending on the task:
- General vacuuming / dusting (7 & 8)
- Vacuuming in confined spaces (7)
To fit an accessory, proceed as follows:
Remove the appliance from the base.
x
Insert the appropiate accessory into the front of the
x
appliance.
If necessary, fit the required number of tubes (6) between
x
the appliance and the accessory to extend the working
height.
6
Use
Warning! Before connecting to the power supply, make sure
that the appliance is switched off.
Switching on and off
To switch the appliance on, slide the on/off switch (1)
x
forward.
To switch the appliance off, slide the on/off switch
x
backward.
Warning! Make sure the accessories are securely attached
before switching on. Keep a firm grip on the appliance when
switching on and during use.
Operating the appliance
The appliance can be used either with the long handle as an
upright vacuum cleaner or without the long handle as a hand-
held vacuum cleaner:
Operating as an upright vacuum cleaner (fig. F & G)
The upright vacuum cleaner is used for vacuuming hard floors,
carpets and rugs.
Raise the handle (3).
x
Clip the cable end leading to the appliance into the cable
x
restraint (13).
Switch the appliance on.
x
If the appliance is locked in the upright position by the
x
suction head, hold the head in place with your foot and
pull at the handle until the head dislocates.
The brush roller (14) is needed when cleaning rugs and carpets.
To switch on the brush roller, press the button (15).
x
To switch off the brush roller, press the button (15) again.
x
Operating as a hand-held vacuum cleaner
The hand-held vacuum cleaner is for use on upholstery and in
confined spaces.
Remove the hand-held vacuum cleaner from the base.
x
If necessary, fit the required accessory.
x
Switch the appliance on.
x
Thermal safeguard
The motor of the appliance is fitted with a thermal safeguard.
This device automatically switches the appliance off in case of
overheating. If this occurs, proceed as follows:
Switch the appliance off and remove the plug from the
x
wall socket.
Allow the unit to cool. When the unit has cooled down,
x
empty the dust bowl and clean the filter.
Re-insert the plug in the wall socket and switch the
x
appliance on.