YURAKU YUR.CAM DPC13 Manual De Instrucciones página 2

Yur.Cam DPC13
4. Explanation of the status icons on the LCD
screen
Item Function Description
The batteries are full.
1 Battery indicator
The batteries are empty.
Setting for taking photographs
2 Recording mode
Setting for recording videos
Displays the resolution.
5M=2560x1920;
3M = 2048x1536;
3 Camera resolution
1.3 M=1280x960;
VGA=640x480;
QVGA=320 x 240
Photo mode :Photo No. have, been taken.
Video mode: Video recording time in second;
4 Photo / Video counter
Playback mode: current number. of pictures or
video clips
Indicates memory or SD card.
Memory or SD card
5 : Pictures stored in built-in memory.
indicator
: Pictures stored in SD card.
5. Using the camera
5.1 Installing the batteries
1. Open the battery door.
2. Insert 2 AAA alkaline batteries into the camera according to the correct
polarity marked in the battery compartment.
3. Turn on the camera
Slide the power to activate. Slide it again to turn this Digital Camera off.
5.2 Inserting a memory card (not included)
This camera has built-in internal memory. This memory can be extended with a
SD memory card (not included).
Follow the instructions given below to insert the optional SD memory card into
the camera.
1. Open the camera's battery door by sliding it downwards.
2. Insert the SD card into the slot.
3. Press the SD card completely into the camera and then close the door.
Open the door and press on the memory card if you wish to remove it.
Yur.Cam DPC13
Note: There is only one right direction to insert the SD memory card into the slot.
Do not force the card into the slot, or else it may damage both the camera and
the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See
the following sections for more information.
5.3 Setting your camera
In the mode you can set all the option of you camera;
1. Press MODE to select the mode (picture or video) you want to set;
2. Press MODE and hold it to enter system setting menu;
3. Select what you want to set by NEXT, and press OK to confirm;
4. Set the option you selected by NEXT, and press OK again to confirm;
5. Press MODE to exit.
5.4 Taking photographs
1. Slide the power ON/OFF to activate your Digital Camera.
2. Set the camera to photo mode ( ).
3. Use the LCD screen to aim the object you wish to photograph.
4. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the
LCD display turn on again.
5. You can press and hold MODE to set proper resolution, Self-time shot and
so on, and press shutter to confirm, and press and hold MODE again to return.
Note: If you take photographs with the default camera settings, it is possible
that the quality of the photographs will not always be optimal. Different
surroundings produce different results. Adjust the camera settings as
required.
5.5 Zoom in and out
The camera can zoom in up to 4 times in preview mode by pressing ZOOM
(1x-4x-1x), and you can also use it to zoom in/out photographs in playback
mode.
5.6 Taking photographs using self-timer function
You can use the self-timer function when you wish to take a photograph of
yourself or when you wish to photograph an object where the camera must be
as still as possible, for example on the stand.
1. Set the camera to photo mode ( ).
2. Press and hold the MODE button. The quick menu will appear.
3. Press NEXT to select self-timer mode, and press OK to confirm
4. Setting the time with NEXT button(10S), and press OK to confirm
5. Press MODE to complete your setting. The self-timer function is now
ready for use, and the ICON will be shown on the top of the LCD.
6. Aim the object you wish to photograph.
7. Press the shutter button to take a photograph.
8. The photograph will be taken after the time delay you set, and the camera
will beep once.
5.7 Recording video clips
1. Press the MODE button to select video mode ( ),
2. Press the shutter button to start recording video, press the shutter button
again for a pause. The video clip will now be saved as an AVI file in the
camera memory.
3. You can press and hold MODE to set proper resolution, and press shutter
to confirm.
5.8 Playback photographs or video clips
1. Press Playback button , it will show video clips or photos picture on the
LCD
2. Press NEXT to review next the photo or video clip.
3. Press MODE again to exit the Playback mode.
Note: The video clip will auto run if you select it until you select others.
All specification and information are subject to changes without further notice.
Yur.Cam DPC13
5.9 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or Format the
memory.
Follow the instructions given below to delete photograph/video clips.
1. Press playback button, enter playback mode.
2. Select the photo or video clip you want to delete with NEXT key;
3. Press and hold MODE button to enter the menu,
4. Select Delete one / Format memory with NEXT key, Press OK
to confirm.
5. Select √ and press OK to confirm again, you will exit the menu.
6. You can also press and hold MODE to exit.
NOTE: 'Format memory ', the files in camera will be deleted all.
6. Press the smile button to send out "smile"
sound before taking photo
7. Installing the camera driver
The driver in the CD has to be installed for windows ME, Windows 2000,
Windows XP Windows Vista to use as a PC cam only. (Download picture /video
is driver free).
7.1 Uninstalling old drivers and devices
There is a chance for a conflict between the new driver and an existing driver in
the computer. In that case, it is better to remove those drivers before installing
the new driver.
1. Enter Windows 'Safe Mode' (press F8 when starting Windows and then
select 'Safe Mode' from the menu which will be displayed).
2. Click on 'Start – Settings – Control Panel' and double-click on
'Add/Remove Programs' icon.
3. Find all the programs for similar, old devices and remove these by clicking
on the 'Add/Remove' button. When in 'Safe Mode', it is possible for some
programs to appear twice. In that case, remove all the programs which
appear twice.
4. Restart the computer.
7.2 Installing the driver for Windows ME / Windows
2000 / Windows XP/Windows Vista
Note: Make sure all other programs are closed during the installation process.
Note: During installation for Windows XP, you may receive a message saying
that the driver has not been signed. This does not cause a problem for the
functionality of the program. Please click "Yes" to continue.
Note: For example, 'D: \' is used to indicate the CD-ROM drive. This may be
different for your computer.
1. Insert the CD-ROM into your computer's CD-ROM drive. The installation
program will start automatically. If it does not start automatically, please do
the following:
a) Select 'Run' from Windows Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.
2. The Software Installer will appear.
3. Select the language you wish to use for the installation.
4. Click on 'Install driver to start the installation of the camera driver.
5. Follow the on-screen instructions.
7.3 Connecting the camera
The camera can be connected to the computer in two different modes: mass
storage device and PC camera.