YURAKU YUR.CAM DPC13 Manual De Instrucciones página 3

Yur.Cam DPC13
7.3.1 Connecting as a mass storage device
This option makes it possible to download photographs and video clips onto
your computer.
1. Slide the power ON/OFF switch to activate your Digital Camera.
2. Press and hold MODE button to enter system setting menu.
3. Press NEXT button to select USB connection, and press OK to confirm.
4. Press NEXT button to choose the mass storage mode.
5. Press OK to confirm.
6. Connect the camera to the computer.
Windows will automatically detect the camera. You can use this camera as
7.
a removable disk.
7.3.2 Connecting as a PC camera
When you connect the camera as a PC camera, you can use the camera as a
web cam for video conferencing on the Internet by using Windows NetMeeting
or Windows Messenger.
(You must install the driver before connecting the Digital Camera to your
computer).
1. Slide the power ON/OFF switch to activate your Digital Camera.
2. Press and hold MODE button to enter system setting menu.
3. Press NEXT button to select USB connection, and press OK to confirm.
4. Press NEXT button to choose the PC Camera mode.
5. Press OK to confirm
6. Connect the camera to the computer.
7. Windows will automatically detect the camera. You can use this camera as
a web camera.
8. Trouble shooting
Problem Cause Solution
Cannot turn on the camera Low battery power, Install or replace the battery
by pressing the "power" battery is missing or correctly.
button. incorrectly inserted the
battery.
Photos are not saved or are The built-in memory Format the memory in system set
missing when taking hasn't been formatted mode of the camera. Please refer
pictures. properly in the camera. to section 5.4.
Cannot find removable disk 1. Connection failure. 1. Make sure all cable
after connecting the camera 2. The mode of the connections are secured and
to the computer via U SB. camera is not set to restart the computer.
removable disk 2. Set the camera to removable,
properly refer to section 7.3.1
setting, USB connection).
1. The camera is not 1. Hold the camera steadily until it
held steadily beeps when takes photo.
The photos are blurry 2. The lens of camera is 2. Clean the lens with soft dry
dirty cloth.
Get a warning message: 1. Conflict with another 1. Remove any other camera
"Capture device was not camera or capture driver completely from your
detected" when trying to device. system. Sometimes you have to
open PC cam. 2. The mode of the re-install your system.
camera is not set to 2. Set the camera to PC cam
PC cam mode mode, refer to section 7.3.2
properly. (system setting, USB connection).
AM-D181-AGB-STD-R
- end -
(system
All specification and information are subject to changes without further notice.
Yur.Cam DPC13 Yur.Cam DPC13