Section
03
Basic Operations
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
When the DVD player is
operated from rear seats
% Press DVD PWR to turn the DVD play-
back on.
Notes
! Even if the source selected with this unit is
not DVD, if you switch power to this unit on
with DVD PWR, you can watch the DVD pic-
ture from this unit on the rear display.
! Regardless of whether this unit is switched on
or off, you can watch the DVD video on the
rear display.
Selecting a source
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Digital1 (digital source 1)Digital2 (digital
source 2)TV (television)DVD (DVD player/
multi-DVD player)Multi-CD (multi-CD
player)AUX (AUX)Analog1 (analog
source 1)Analog2 (analog source 2)
Analog3 (analog source 3)Analog4 (ana-
log source 4)Analog5 (analog source 5)
Analog6 (analog source 6)
Notes
! You cannot use digital sources (Digital1 and
Digital2) and DVD simultaneously. When
you connected Pioneer DVD player with IP-
BUS cable, you can only use DVD source.
10
En
All manuals and user guides at all-guides.com
Otherwise, digital sources (Digital1 and
Digital2) can be used.
! When no source is connected, short beep will
sound when you try to select a source.
! In the following cases, the sound source will
not change:
When a unit corresponding to each source
is not connected to this unit.
When no magazine is set in the multi-CD
player.
When no magazine is set in the multi-DVD
player.
When no disc is set in the DVD player.
When the AUX (auxiliary input) is set to off
(refer to page 29).
When the analog sources are set to off
(refer to page 30).
Adjusting the volume
% Use VOLUME to adjust the sound level.
Press to increase or decrease the volume.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
When the DVD player is
operated from rear seats
% Press DVD PWR to turn the DVD play-
back off.