Adjusting The Brightness; Correcting Distorted Sound; Switching The Telephone Muting/Attenuation; Switching The Auxiliary Setting - Pioneer AXM-P7050 Manual De Operación

Initial Settings

Adjusting the brightness

You can adjust the display brightness. Initially
this mode is set to 12.
1 Press o to select Brightness.
Press o repeatedly until Brightness ap-
pears in the display.
2 Press m or n to adjust the bright-
ness level.
Each press of m or n increases or de-
creases the brightness level. 0  15 is dis-
played as the level is increased or
decreased.

Correcting distorted sound

You can minimize distortion likely caused by
the equalizer curve settings.
! Setting an equalizer level high can cause
distortion. If high sound is crippled or dis-
torted, try switching to Low. Normally,
leave the setting at High to ensure quality
sound.
1 Press o to select Digital ATT.
Press o repeatedly until Digital ATT ap-
pears in the display.
2 Press m or n to select Low or High.
Pressing m or n will switch between High
(high) and Low (low) and that status will be
displayed.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
All manuals and user guides at all-guides.com
1
Press o repeatedly until Telephone appears
in the display.
2
phone muting/attenuation.
Press m or n until the desired setting ap-
pears in the display.
! The sound is turned off, MUTE or ATT is dis-
! Operation returns to normal when the phone

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1
Press o repeatedly until AUX appears in
the display.
2
AUX :ON appears in the display.
# To turn auxiliary setting off, press q.
Press o to select Telephone.
Press m or n to switch the tele-
! Telephone :MUTE  Muting
! Telephone :ATT2  Attenuation
(Telephone :ATT2 has a stronger effect
than Telephone :ATT1)
! Telephone :ATT1  Attenuation
Notes
played and no audio adjustment is possible.
connection is ended.
Press o to select AUX.
Press r to turn auxiliary setting on.
Section
08
29
En