Battery Type - Stanley FATMAX SFMCCS630 Manual Del Usuario

2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely depleted
of charge. The battery pack will need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge STANLEY FATMAX battery packs only
with designated STANLEY FATMAX chargers.
Charging battery packs other than the
designated STANLEY FATMAX batteries with a
STANLEY FATMAX charger may make them burst or
lead to other dangerous situations.
Do not incinerate the battery pack.

Battery Type

The SFMCCS630 operates on a 18 volt battery pack.
These battery packs may be used: SFMCB202, SFMCB204,
SFMCB206. Refer to Technical Data for more information.
Package Contents
The package contains:
1 Chainsaw
1 Scabbard
1 Bar 30 cm
1 Chain 30 cm
1 Instruction manual
1 Li-Ion battery pack
1 Li-Ion battery charger
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Always wear a dust mask.
Do not leave in rain.
Tip contact can cause the guide bar to move suddenly
upward and backward, which can cause serious injury.
Contact of the guide bar tip with any object should
be avoided.
Rotational direction of the saw chain.
Always use two hands when operating the chainsaw.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery from
the tool.
Directive 2000/14/EC guaranteed sound power.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
ON/OFF trigger switch
1
Lock-off lever
2
Chain brake/front hand
3
guard
Guide bar
4
Saw chain
5
2019 XX XX
Sprocket cover
6
Bubble Level
7
Bar adjust locking knob
8
Chain tensioning knob
9
Oil level indicator
10
Guide bar scabbard
11
English
11