Kohler Greek K-1492-H2 Diagrama De Instalación página 2

Note: Pump Protrusion Beyond Rim
16"
(40.6 cm)
1-1/8"
(2.9 cm)
2-7/8"
(7.3 cm)
Product Information
Bath whirlpool
Required accessories:
Jet trim kit
Fixture*: basin area
Bathing 36" (91.4 cm) x
well 20-1/2" (52.1 cm)
water depth
To 17-1/2" (44.5 cm)
overflow
* Approximate measurements for comparison only.
Pump Heater
1.5 hp 1.5 kW
Drop-in cutout 46-1/2" (118.1 cm) x 30-1/2" (77.5 cm)
Minimum required access panel:
Pump/control
1022393-1-B
8-3/4" (22.2 cm)
48" (21.9 cm)
3/4" (1.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1492-H2 shown
K-9694
top area
42" (106.7 cm) x
26" (66 cm)
capacity
68 gal (257.4 L)
V Hz A
240 50/60 11
20" (50.8 cm) W x 15" (38.1 cm) H
4" (10.2 cm)
Pump/Control Access
20" (50.8 cm) W x 15"
(38.1 cm) H Minimum
(Typical)
3/4" (1.9 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
weight
Notes
103 lbs
(46.7 kg)
NOTE: Pump protrusion beyond rim.
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
1000 lbs (453.6 kg).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
No change in measurements if connected
with drain illustrated. (K-7163 or K-7163M)
32" (81.3 cm)
23-3/8"
(59.4 cm)
1-1/2" OD
220/240 V, 20 A, 50/60 Hz
Kohler Co.