THOMSON RK200CD Manual De Instrucciones página 19

TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume play, press the PAUSE button again.
RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1 . Insert the cassette tape.
2 . Press the PAUSE button.
PAUSE
3 . Press the RECORD
4 . Prepare to play the source to be recorded and
play it. Press the FUNCTION button to setect
CD or RADIO.
MAINTENANCE
CLEANING CD
If the CD skips or will not play , the disc may need cleaning
. Before playing, wipe the disc from the centre out with a
cleaning cloth. After playing, store the disc in its case.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly
wiping with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem
occurs, disconnect the AC power cord and remove the
batteries. Wait at least 5 seconds, then reconnect the AC
power cord or reinstall the batteries.
5 .
button.
TO STOP RECORDING
RECORD
Press the STOP / EJECT button.
TO INTERRUPT RECORDING
Press the PAUSE button.
To resume recording, press the PAUSE button again.
TO ERASE A RECORDED TAPE
1.
2.
3.
GB-8
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECT button to stop winding at the desired position.
Recording from a CD Recording from the radio
PLAY THE CD TUNE INTO A STATION
Press the PAUSE button.
PAUSE
Press the FUNCTION button to select TAPE.
Insert a tape with the side you want to erase facing you.
Press the RECORD button to start erasing.
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust with the
brush. Finger prints may be removed with a cotton swab
moistened with alcohol.
WARNING
Should the CD door be opened before the reading of the CD
is completed, a jamming noise may occur. This is resolved
by closing the CD door.