Firmware Upgrade; Troubleshooting Guide - REMOVU R1+ Manual Del Usuario

4. Firmware Upgrade

Please visit our website at www.removu.com/firmware to get
the latest firmware. The detailed upgrade instructions can also be
found on the page.
5. Trouble Shooting Guide
1. If "No firmware to update" message appears after firmware
update,
Solution: Connect your device to a PC and delete all files stored
in the storage. Then copy the .bin firmware file to the memory
and reboot.
2. If "Low firmware versions" message appears after firmware
update,
Solution: Connect your device to a PC and delete all files in the
storage. Reboot to check the version of the firmware.
3. If you can't see your on the camera network list,
Solution: In order to establish Wi-Fi connection between R1+
and GoPro, the GoPro needs to have its SSID. The SSID can be
generated through the GoPro App. Before using with R1+, please
establish connection between GoPro HERO4 and GoPro App to
generate the SSID.
4. If the diplay gets darker or backlight goes off,
Solution: It means that the battery is running low, so please
recharge the device.
5. If your device freezes while using,
Solution: Press the reset button located next to the charging
port. If the problem persists, please constact customer support.
6. If the device does not boot, or shuts down automatically
while booting,
Solution: Please connect your device to your PC, and have all
files deleted in the storage. If there aren't any files, please con-
tact customer support.
7