Desoutter DSTxs Serie Manual De Instrucciones página 9

DSTxs 50-80 cNm
NOTICE! Do not install the DSTxs near any surface that could limit its action range. Respect the following
guidelines in order to make sure that there is a clearance between the transducer cable and any external
surface:
Connect the transducer cable to the DSTxs and to the measuring instrument (Delta xD data analyzer).
For more information about the Desoutter Delta, refer to "Delta User Guide" (Desoutter User Guides are
available at http://www.desouttertools.com/resource-centre).
12/2018
EN
Make sure to install the DSTxs base on a stable horizontal
working station to avoid/minimise any vibration or movement of
the system. Install the DSTxs with four fixing bolts M4 (see the
figure on the left).
Make sure not to bend the transducer cable: the
operating area of the DSTxs should be of 300 mm
(starting from the DSTxs main screw) – see the figure
on the left.
9 / 160
Product Instructions