Technical Specifications - Metabo PowerMaxx 12 Manual Original

17027022_0811 PowerMaxx 12.book Seite 12 Montag, 1. August 2011 8:45 08
ENGLISH
ENG
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-
circuiting (e. g. by protecting them with adhesive
tape).

12 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
U = Voltage of battery pack
n = No-load speed
Tightening torque for screwing:
M = soft screwing application (wood)
A
M = hard screwing application (metal)
B
M = adjustable torque (with torque
C
control)
Max. drill diameter:
D = in steel
1 max
D = in softwood
2 max
m = Weight (with battery pack)
G = Spindle thread
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745:
a = Vibration emission value (drilling into
h, D
metal)
a = Vibration emission level (screwing
h, S
without impact)
K = Uncertainty (vibration)
h, ...
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It is also
suitable for a provisional estimate of the vibratory
load.
The specified vibration level applies to the main
applications of the power tool. However, if the tool
is used for other applications, with different acces-
sories or is poorly maintained, the vibration level
may vary. This can considerably increase the
vibratory load over the entire working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This can considerably
reduce the vibratory load over the entire working
period.
12
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty (noise level)
pA WA
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).